Can You Use Double-Sided Tape On Led Strip Lights?

Can You Use Double-Sided Tape On Led Strip Lights

Double-sided tape is a very versatile adhesive that can be used on many different surfaces. It has been around for years and continues to grow in popularity, but what about LED lights? Can you use double-sided tape on LED lights? This article will answer this question and more.

Can you use double-sided tape on LED Strip lights? Yes, you can use double-sided tape on LED lights. Double-sided tape is strong enough to hold the strip lights in place and does not leave a residue on the light of the surface where they are applied.

The double-sided tape is flexible enough that it can be used for different surfaces such as wood, metal, plastic, and more, but at the same time, it is also durable so the lights will stay in place.

To learn more about why you can use double-sided tape to mount your led strip lights, keep reading this article.

Details On Why You Can Use Double-Sided Tape On LED lights

1. Double-Sided Tape is Versatile

Double-sided tape is one of the best ways to mount LED strip lights because it can stick to various surfaces.

If you are looking for a way to mount your lights, this is the perfect solution. You can use double-sided tape on both the floor, ceiling, wall, furniture, materials such as wood, plastic, metal, glass, etc.

This tape can hold LED lights to different surfaces without leaving behind a sticky residue so you will not have to worry about it damaging your surfaces.

It is important to note that you should only use the tape on smooth and flat surfaces for best results.

If the surface has any texture or bumps in it, you may not be able to get a stronghold with the tape.

When you use double-sided tape on the LED lights, make sure that they fit perfectly against one another and are not overlapping.

2. Leaves Little-To-No Residue

After you remove the double-sided tape from your LED lights or wall, there will be very little residue left on them.

Even if you use it on different surfaces, there will be no sticky residue left behind. This is not only good for the lights but also for you because it will not be painful to try and remove the tape.

You will still need to use care when trying to pull it off, but you do not have to worry about getting sticky residue stuck on your lights or the surface where they were used.

This is especially helpful for any surfaces you do not want to damage with the tape.

3. Double-Sided Tape Gives You Secure Adhesion

While double-sided tape is not as strong as other strips’ light adhesive solutions like hot glue, it will hold LED lights in place.

It can be used on many different surfaces to give your lights an even distribution. You can mount them on the floor, ceiling, wall, tabletops, and more without having any problems.

I do not like it when you put up my led strip lights and they keep falling off the surface. I am afraid that they will get damaged when someone steps on them or when it is windy outside and the tape does not hold up.

This adhesive is strong enough to hold your lights in place without having any issues.

4. Double-Sided Tape Is Flexible

Another reason why you can use double-sided tape on led strip lights is that it is flexible.

When the adhesive holds onto a surface, it will not cause the lights to become stiff or rigid.

The flexible nature of this tape allows for your led strip lights to move with the surface without getting damaged.

You do not want the lights to stay in one place all of the time or they will wear out and break.

You should be able to bend the strip lights around corners, drawers, door frames, and more. This is why double-sided tape is the perfect choice for your led lights.

5. Double-Sided Tape Is Easy to Cut and Apply

Another reason why you should consider double-sided tape for your led strip lights is that it is easy to cut and apply.

Before you use the tape, make sure that you measure it correctly. When using double-sided tape on led strip lights, cut off a piece with scissors or a utility knife.

Then, peel off the backing and press it firmly to your surface. It is just that easy!

You do not have to worry about the tape getting stuck together or any adhesive residue making it hard for you to apply.

This is one of the easiest methods you can use to secure your led strip lights.

6. Double-Sided Tape is Easy To Use and Remove

One of the best things about double-sided tape for LED lights is that it is easy to use and remove.

When you want to move your strip lights, you can simply pull them off the surface without any problems.

If you are placing them in the same location, double-sided tape is also easy to reapply without it leaving any residue or getting stuck together.

After a while, you may need to replace the tape from your strip lights. This is easy as well because you can cut a new piece and reapply it to the led strip lights.

7. Weather Resistant

Finally, double-sided tapes are also weather-resistant, which means that they can be used in a wide range of different environments.

You do not have to worry about rain or snow It can handle different weather conditions so you do not have to worry about your lights falling off in bad weather.

If you are trying to find an alternative that is both easy to use and flexible enough for your led strip lights, you should consider double-sided tape.

This is an easy way to keep the lights in place on your surfaces.

Some Common Double-Sided Tapes You Could Go For

There are different kinds of double-sided tapes out there. Some are designed specifically for led strip lights, while others can be used with other materials.

My go-to double-sided tape for the purpose of sticking LED strips around the house is the 3M VHB (Very High Bond) tape. These tapes are on the more expensive side, but they will keep your led strip lights in place for good without leaving any residue.

You can also use double-sided foam tape for LED strip lights. This kind of double-sided tape is usually inexpensive and easy to use. At the same time, it does not leave any residue or damage the surface that you are using it.

Final Thoughts

To sum up, it is clear the double-sided tape is one of the best alternatives to use for LED strip lights.

Double-sided tapes are easy to cut and apply, it can bend around corners without getting damaged, you do not have to worry about them coming off in bad weather, and you can remove the tape without leaving any residue.

If you are trying to find an easy way to secure your led strip lights, double-sided tape is one of the best choices you can make.


Q: Where can I get double-sided tape for my led strip lights?

A: You can find double-sided tape at any hardware store or online. My go-to double-sided tape is the 3M VHB (Very High Bond) which you can find on Amazon.

Q: Does it matter how I cut the double-sided tape to fit my LED strip lights?

A: It is crucial that you measure your led strip lights correctly and cut the double-sided tape accordingly. Make sure that you measure the strip lights in millimeters and cut the strips to fit your leds perfectly. This will keep them from falling off and ensure that they do not come into contact with any heat sources.

Q: Can I use double-sided tape on any surface?

A: You can use double-sided tapes on a variety of surfaces. It works especially well with led strip lights, but you can use it on any surface that you are trying to stick something onto.

Q: Can I use double-sided tape on wood?

A: It depends. Double-sided tapes are designed to be used on a wide range of different surfaces, but they may not be as effective especially on unfinished wood. You can try to use double-sided tape with your led strip lights, however, you may have to apply a lot of pressure or take other measures to ensure that they stay in place.

Recent Posts