My wife loves wallpaper on the walls. I never really understood the appeal but to each their own. Recently, we had our first child, and my wife wanted to put up wallpaper in the nursery. We found some really cute designs, but I was worried about putting LED strip lights on the wallpaper.<\/p>\n\n\n\n
I did some research, and it turns out that you can put LED strip lights on the wallpaper and here’s why;<\/p>\n\n\n\n
The material of the wallpaper is not an issue when it comes to LED strip lights. The main thing you want to focus on is the smoothness of the surface. If the surface is too textured, the light will not be able to stick either.<\/p>\n\n\n\n
As we all know, many wallpapers will come with some kind of design or texture.<\/p>\n\n\n\n
But, the thing is that the majority of these will be smooth enough for the LED lights. In case you are not sure, you can always test it out on a small section before applying it to the whole wall.<\/p>\n\n\n\n
Another great thing about LED strip lights is that they are very flexible. This means you can easily apply them to the wallpaper without worrying about damaging it.<\/p>\n\n\n\n
The flexibility of the lights also makes it easier to apply them in different areas. For example, you can easily contour them around any obstacles on the wall, such as outlets or switch plates.<\/p>\n\n\n\n
Most LED strip lights will come with some kind of adhesive on the back. This is what allows them to stick to the surface without any issues.<\/p>\n\n\n\n
The good thing about the adhesive is that it is usually strong enough to hold the lights in place, even on wallpaper. However, you may want to test it out on a small section first to be sure.<\/p>\n\n\n\n
Another reason why it is possible to put led strip lights on wallpaper is that they are very lightweight. This means that they will not cause any damage to the wallpaper when applied.<\/p>\n\n\n\n
You only need to be careful to ensure the adhesive is strong enough to hold the lights in place.<\/p>\n\n\n\n
Even though there are some benefits of putting LED strip lights on the wallpaper, there are also some potential downsides that you need to be aware of.<\/p>\n\n\n\n
The first thing to keep in mind is that the adhesive on the back of the lights may not always be strong enough<\/strong>. This means they could potentially fall off the wall and damage the wallpaper and the lights.<\/p>\n\n\n\n Another thing to keep in mind is that the heat generated by the lights could cause some damage<\/strong> to the wallpaper over time. This is why it is important to ensure that you buy high-quality lights that generate very little heat.<\/p>\n\n\n\n Finally, you must be careful of how much power you use with the lights. If you are using too much power, then it could potentially cause a fire<\/strong>. Therefore, it is always better to err on the side of caution and use less power than you need.<\/p>\n\n\n\n All in all, putting LED strip lights on wallpaper is definitely possible, and there are some benefits to doing so. Just be sure to keep the potential downsides in mind before making your final decision.<\/p>\n\n\n\n All in all, there is no reason why you cannot put LED strip lights<\/a> on wallpaper<\/a>. However, there are a few things you need to keep in mind before you do so.<\/p>\n\n\n\n The first thing you need to do is make sure that the wallpaper surface is clean. Any dirt or debris on the surface will make it harder for the lights to stick.<\/p>\n\n\n\n You can use a dry clean cloth to thoroughly wipe the wallpaper surface before going ahead to mount the lights.<\/p>\n\n\n\n Another thing you need to consider is whether the wallpaper is properly pasted or not. If the wallpaper is not pasted correctly, then it won’t be easy to apply the lights. You can use a leveler to ensure the surface is even before mounting the lights.<\/p>\n\n\n\n When applying the lights, make sure to use a good quality adhesive. This will ensure that the lights stay in place and do not damage the wallpaper.<\/p>\n\n\n\nThings To Consider When Putting Led Strip Lights On Wallpaper<\/strong><\/h2>\n\n\n\n